Self-leveling one-component mortar based on special cement, suitable aggregates and metal fibers, which must be mixed with water. The product is extremely fluid and is specially used for the repair and finishing of concrete surfaces, for internal and external use, where leveling layers with a very high abrasion resistance, with a thickness of 3 to 8 mm, are required.

Features

• self-leveling mortar - does not require smoothing
• excellent adhesion to the concrete substrate
• high impact resistance
• high resistance to abrasion and ultraviolet radiation, the effects of salt and freezing-thaw cycles
• fast curing, after use, can be used after 8 h for pedestrian traffic, after 24 h for light traffic, after 72 h for heavy traffic
• only mixes with water

Application

• can be used to repair concrete surfaces on horizontal surfaces and on gentle slopes
• the possibility of applying the material inside and outside
• as a maintenance layer secured with Maxepox Morter resin track in mobile tanks in wastewater treatment plants wastewater in
• mortar for flooring in factory halls, warehouses, workshops, parking lots, garages

Technical data

• color: gray, pearl gray, red, green
• water mixing ratio 19.2-20%
• fluidity, 5 x 3 cylinder (drop) mm 140 mm
• working time (20 C) 30–45 min
• setting time (20 C): initial 1.5–2.5 h; final 2.5–4.5 h
• putting into service, 20 C: pedestrian traffic 8 hours; light vehicular traffic 48 hours; heavy vehicle traffic 72 h
• the density of the hardened product 2.0 0.05 g / cm ²
• flexural strength: after 7 days 6.0 MPa; after 28 days 10.5 MPa
• compressive strength: 29.2 MPa after 7 days; after 28 days 39.5 MPa
• surface hardening SH 72.3 N / mm ²
• impact resistance 4.91 / 500 N m / mm
• abrasion resistance Bohme 4.7 cm ^3/50 cm ²
• adhesion to concrete after 28 days> 2 MPa
• approximate consumption with a maximum and minimum thickness of 3/8 mm 1.7 kg / m ² / mm
• package 25 kg bag