Drizoro - polyuretan -cementová malta Maxurethane CEM - C
cena na vyžádání
propagační cena
jednotková síť
98,85Kč pro kilogram
minimální komerční
množství produktu
30.92 kilogram
3331,15Kč
pro 30.92 kilogram
3056,61Kč
pro 30.92 kilogram
propagační cena
hrubá jednotka
121,59Kč
pro kilogram
minimální komerční
množství produktu
30.92 kilogram
4097,31Kč
pro 30.92 kilogram
celková cena
propagační sleva
3759,59Kč
pro 30.92 kilogram
Popis produktu
Three-component, water-based polyurethane-cement mortar for application with a trowel or trowel in layers with a thickness of 4-20 mm, intended for corners and other hard-to-reach places within the Maxurethane CEM system.
Features
- thermal resistance better than epoxy coatings from -40 C to +150 C
- a coating over 9 mm thick is not affected by the steam cleaning cycles
- high mechanical parameters, great compressive strength, abrasion, impact strength, mechanical cleaning, etc.
- excellent chemical resistance, better than epoxy system
- product suitable for use on slightly damp surfaces and on fresh concrete (7 days after pouring)
- environmentally friendly product, non-toxic, solvent-free, non-flammable, suitable for use in rooms with low air movement
- application possible in layers of different thickness depending on the needs and requirements on the job site
Application
- floor systems exposed to rapid temperature changes, steam cleaning cycles, hot liquid splashes, for high temperature industrial environments, cold rooms, etc.
- in industrial environments on substrates requiring very high chemical resistance to cleaning substances, degreasing surfactants, fats, diluted acids and bases, hydrocarbons and other aggressive substances
- working floors in the petrochemical, pharmaceutical, food, etc. industries, which impose very high requirements on the materials used in terms of mechanical and chemical resistance
Technical data
- component density in A / B / C 0.99 / 1.23 / 1.35 0.10 g / cm 3
- density of fresh mix A + B + C 2.0 0.10 g / cm 3
- the density of the mature product and after drying 1.95 0.10 g / cm 3
- minimum application temperature of substrate and surroundings> 5 ° C
- pot life at 20 ° C 20 min
- initial / final setting time at 20 ° C 1-2 / 3-4 h
- complete solidification time at 20 ° C and 50% relative humidity before putting into service for: pedestrian traffic 12 days; moderate vehicular traffic 24 days; heavy traffic 48 days
- compressive strength after 28 days> 40 N / mm 2 (according to EN 13892-2)
- bending strength after 28 days> 10 N / mm 2 (according to EN 13892-2)
- adhesion to concrete after 28 days> 3 N / mm 2 (concrete breaking) (according to EN 13892-8)
- thermal resistance of the layer: ≥ 4.0 mm from -15 C to +60 C; ≥ 6.0 mm from -25 C to +70 C; ≥ 9.0 mm from -40 C to +120 C; ≥ 12.0 mm from -40 C to +130 C (occasionally up to +150 C)
- one layer thickness 3–20 mm; consumption * for one layer 1.95 kg / m mm
- packaging 30.92 kg set
* the consumption is indicative and may vary depending on the porosity, texture and application method
Technické údaje - vlastnosti
Přílohy