Adhesive mortar based on special gypsum in very fine aggregates and an additive, which, when mixed with water, forms a paste suitable for fixing plaster profiles: either by applying a thin layer to the substrate, or by placing the required portion of the mortar on the back of the profile.

Features

• great adhesion to standard gypsum substrates
• good thixotropy and initial adhesion, preventing the profiles being fixed from slipping
• easy to use product; the possibility of leaving the container open for a long time and good workability of the product allow you to freely profile the desired shape
• great compatibility with plaster and gypsum; The product does not contain any cement components and does not release salts

Application

• fixing plaster or gypsum profiles indoors, cornice, medallion in ceiling, support, support in, central panels, profile in ceiling, plinth, tabs, corner, wall panels, small domes, etc. on plaster or plaster surfaces
• sealing joints and gaps between plastering profiles

Technical data

• white powder appearance and color
• Relative density of the product as a powder 0.7 0.05 g / cm ³
• maximum size of aggregate <0.2 mm
• mixing water (wt%) 36.7 3%
• shelf life of fresh paste at a temperature of 20 C 60-90 min
• Shelf life when fixing profiles at 20 C 10 min
• application improvement time at 20 C 1-2 min
• setting time at 20 C 2-4 h
• consumption per 1 mm thick layer 1.1 kg / m ²
• recommended maximum thickness of one layer of 3 mm
• package 18 kg bag