Ceresit CD 26 is a coarse-grained, one-component mortar for leveling concrete and reinforced concrete surfaces, filling cavities and damaged areas. The range of application is from 30 to 100 mm. The thickness of the applied mortar layer can be up to 35 mm at one time. CD 26 can be used both on vertical and horizontal surfaces, inside and outside buildings. The mortar can be applied manually and mechanically. The mortar can be used for concrete above C12 / 15.

Technical data:
- Base: cement with mineral fillers and high-quality, powdered resin,
- Grain size: 0 5 mm,
- Mixing ratio: approx. 3-3.2 liters of water per 25 kg,
- Pre-ripening time: approx. 3 min,
- Wear time: approx. 30 min,
- Application temperature: from +5 C to +30 C,
- Shrinkage after 28 days: 0.08%,
- Modulus of elasticity under compression: 18 GPa,
- Compressive strength after 28 days: 40 MPa,
- Flexural strength after 28 days: 9.0 MPa,
- Adhesion to concrete with a graft layer, after 28 days: 1.5 MPa,
- Temperature resistance after binding: from -50 C to +70 C,
- Rain resistance: after about 24 hours,
- Approximate consumption: approx. 2 kg / m2 / 1 mm thick,
- Packaging: 25 kg,
- Number on the pallet: 42 pieces,
- Wyb has the technical approval of Instytut Techniki Budowlanej AT-15-7290 / 2007 and the National Declaration of Conformity No. CD 25/1/07 of April 23, 2007.

Attention:
Xi, Irritant. Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact.