Ceresit CD 30 mortar is used for corrosion protection of reinforcing bars and is a contact layer on concrete and reinforced concrete substrates before applying the remaining component in the system. CD 30 has high adhesion to steel and concrete. Its application between the native concrete and the repair layer enables obtaining very good parameters in mutual cooperation at the layer boundary. The mortar can be used on concrete class above C12 / 15). Thanks to the specially developed recipe and the content of the inhibitor in corrosion, the mortar is an effective corrosion protection for reinforcing steel.

Technical data:
- Base: cement mix with mineral and high-quality fillers, powdered resin and corrosion inhibitors,
- Grey colour,
- Grain size: 0 0.8 mm,
- Mixing ratio: brushable: approx. 6.75 l of water per 25 kg,
- Wear time: about 60 min,
- Application temperature: from +5 C to +30 C,
- Adhesion after 28 days: 1.5 MPa,
- Temperature resistance after binding: from -50 C to +70 C,
- Approximate consumption:
anti-corrosion layer: approx. 2 kg / m2 for 2 layers with a total thickness of approx. 1 mm,
contact layer: approx. 1.5 kg / m2, depending on roughness and variability
Substrate wear may change
- Packaging: 25 kg,
- Number on the pallet: 42 pieces,
- Wyb has technical approval of Instytut Techniki Budowlanej AT-15-7290 / 2007.

Attention:
Xi, Irritant. Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact.