Solvent-free hydrophobizer for impregnation of absorbent dispersion and mineral substrates.

Features

• alkali resistant
• significantly reducing water absorption
• limiting dirt
• retains high vapor permeability
• deeply penetrating
• does not make the surface glossy
• colorless

Application

The product is used to impregnate external plaster in mineral, roof, mineral paint coatings, clinker masonry, facing brick, sandstone cladding. It can be used on highly alkaline substrates, such as silicate brick walls, new joints, know-cement boards, concrete, fresh plaster, etc. The product can be used to protect building facades, including historic buildings against the ingress of rainwater and aggressive substances contained in the air. It can be used to prevent frost damage, efflorescence, algae and moss growth on facades. The preparation guarantees effective hydrophobic impregnation of substrates, even in the case of hairline cracks up to 0.2 mm wide on their surface.

Technical data

• base mixture of selected siloxane and fluorinated polymer
• milky white color, colorless after drying
• density about 1.0 kg / dm ³
• application temperature from +5 C to +25 C
• resistance to rain after about 4 hours
• effectiveness full operation after about 4 weeks for a period of about 6-12 years (depending on the amount of CT 9 applied, substrate porosity, operating conditions and atmospheric pollution)
• water absorption coefficient <0.05 kg / m ² h ^1/2
• water vapor diffusion resistance very low, not lifting, S _d <0.01 m
• approximate consumption: concrete and low-absorbing clinker about 0.3 l / m ² ; silicate brick about 0.9 l / m ² ; absorbent brick, plaster, mortar about 0.8 l / m ²
• packaging 10 liter canister w