Bauder - lepidlo na PVC fólii Thermofol Kontaktkleber
cena na vyžádání
propagační cena
jednotková síť
432,47Kč pro kilogram
minimální komerční
množství produktu
4.50 kilogram
2300,71Kč
pro 4.50 kilogram
1946,10Kč
pro 4.50 kilogram
propagační cena
hrubá jednotka
531,93Kč
pro kilogram
minimální komerční
množství produktu
4.50 kilogram
2829,87Kč
pro 4.50 kilogram
celková cena
propagační sleva
2393,68Kč
pro 4.50 kilogram
Popis produktu
Bauder Kontaktkleber contact adhesive is intended for the assembly of BauderTHERMOFOL foil on approved substrates. Assembly bonding of BauderTHERMOFOL U / M membranes in the area of connections with the wall and the attic, on skylights and ventilation. Approved substrates: plastic (GFK), steel, OSB, concrete, glass. Do not use for gluing on the entire surface, on EPS and on non-laminated PUR / PIR thermal insulation.
Mounting / Application
The gluing surfaces must be clean, dry, free of grease and dust-free,
apply the adhesive on both sides with a brush, the cleaned surface can be smeared possibly twice, allow about 10 minutes for ventilation, perform a finger test (no wet places on the surface), apply the adhesive precisely and press firmly, observe safety instructions, close the container after use.
Fire protection and health protection
- Reaction to fire: flammable
- Health hazard: irritant
properties
- Material: nitrile rubber and synthetic resin dissolved in fast evaporating, flammable organic solvents
- Color: light
- Odor: solvent-specific
- Flash point: - 17 C
- Relative thickness: 0.9 0.05 g / cm2
- Viscosity: 3500 mPas
- Consumption: 200 to 300 g / m2 depending on the surface
- Storage: in closed containers for at least 18 months
- Drying time: about 10-30 minutes
- Processing temperature: optimally 15-25 C, minimum 5 C
Technické údaje - vlastnosti
- množství v balení:
- 4,5 kilogram