A primer dedicated to various types of substrates (floors, walls, ceilings), inside and outside buildings.

Features

• penetrates the substrate and binds the aggregate grains, thus strengthening the primed layer
• high performance
• a specially selected pigment colors the substrate, enabling the control of the work progress, both when the ground is still wet and when it is already dry - the color obtained does not reduce the hiding power of paint coatings
• reduces the absorbency of the substrate
• definitely improves traction
• application with a brush, roller, spraying
• frost-resistant
• waterproof

Application

• priming surfaces before making floors, fixing floor coverings, plastering, filling, laying ceramic tiles, wallpapering and painting
• compensates for absorbency and reduces surface absorbability, which ensures adhesion of subsequent applied layers
• especially recommended for standard substrates, i.e. cement floors and screeds, anhydrite screeds, cement and cement-lime plasters and coats, gypsum plasters and coats, polymer coats, gypsum plasterboards, cellular concrete masonry, brick wall or block in silicate, brick or ceramic block wall, gypsum block wall
• recommended for difficult substrates, i.e. cement floors and screeds with underfloor heating, anhydrite screeds with underfloor heating, concrete, acrylic paint coatings, renovated substrates, covered with putty and paints, existing ceramic and stone cladding, terrazzo, OSB boards, stable linoleum, PVC, concrete varnishes, oil paint coatings
• indoor and outdoor, on horizontal and vertical surfaces

Technical data

• an emulsion density of about 1.0 g / cm
• substrate and ambient temperature during work from +5 C to +35 C
• commencement of further works after priming: after 15 minutes - plasters, silicate blocks, aerated concrete blocks; after 2 hours - self-leveling floors