A mixture of silicone resins, quartz flours, dolomite aggregates and additives for modifying, hydrophobisers and specially selected pigments, reinforced with microfibers.

Features

• high durability of the expedition during operation - through the use of a combination of silicone dispersions, special additives and a modifier; the durability of the expedition was increased
• resistance to the effects of atmospheric agents and U radiation
• flexible and durable - the formulation provides increased flexibility and impact resistance, the plaster perfectly compensates for the stresses arising in the event of impacts on its surface, maintains its cohesiveness and does not chip off; ability to bridge thermal stresses and impact blows ensured by the high content of dedicated polymer resins and thanks to micro-reinforcement with fibers
• hydrophobization of the surface, self-cleaning ability - the high content of silicone resins allows for a hydrophobic effect, ensuring that dust and dirt particles do not adhere to the surface of the expedition and can be rinsed off during rainfall
• resistance to cracking - increased resistance, achieved thanks to a specially selected bulk pile of fine fillers and the presence of dispersed microfibers acting as an effective reinforcement in the entire volume of the plaster
• not susceptible to carbon growth - due to the high degree of hydrophobization, structural tightness of the plaster and a very high content of encapsulated coating-active substances
• machine application using the recommended plastering units
• color durability - thanks to the use of modern pigments in a computer-controlled dosing system, the use of special additives in reflective, the production process under constant control
• environmentally friendly - in the final product the content of volatile organic substances was reduced to the maximum and only natural fillers were used
• texture - lamb; invoicing aggregate - up to a maximum of 1.5 mm
• frost-resistant
• waterproof
• inwards and outwards

Application

• place of use: façade in a thermal insulation system with polystyrene, single-layer wall façade, wall inside the building
• types of object in: housing construction; public utility, educational, office, healthcare, commercial and service buildings; communication construction; farm and livestock buildings; passive construction; energy-efficient construction
• location of the object: urban and urban areas, industrial areas, investment areas and economic zones, rural and agricultural areas, wet and humid areas, water reservoirs, in the vicinity of trees and green areas, shaded areas
• type of substrate: reinforced layers of the indicated thermal insulation system, concrete, traditional plasters, cement and cement plaster. made on brick walls, ceramic, cellular or silicate blocks and hollow blocks, gypsum plasters, plasterboards (inside the building)

Technical data

• finished product density about 1.97 g / cm
• diffusion resistance 0.14 m <Sd <1.4 m
• pH 8
• temperature of use (substrate and environment) from +5 C to +30 C
• relative air humidity during application and setting <80%
• drying time about 15 minutes *
• plaster drying time about 24 h *
• average consumption < 2.5 kg of plaster per 1 m ²
• package 25 kg

* applies to the temperature of +20 C and relative humidity of 60%

400 colors - please provide the selected color from the Atlas SAH shade guide in the comment to the order.