Atlas - rychleschnoucí základní nátěr pro kritické podklady Ultragrunt
cena na vyžádání
propagační cena
jednotková síť
528,32Kč pro balíček
minimální komerční
množství produktu
1.00 balíček
592,30Kč
pro 1.00 balíček
528,32Kč
pro 1.00 balíček
propagační cena
hrubá jednotka
649,84Kč
pro balíček
minimální komerční
množství produktu
1.00 balíček
728,53Kč
pro 1.00 balíček
celková cena
propagační sleva
649,82Kč
pro 1.00 balíček
Popis produktu
Ready-to-use mass, made on the basis of polymer resins with the addition of selected quartz aggregate.
Features
- for concrete, terrazzo, ceramic tiles, OSB boards
- for self-leveling compounds, tile adhesives
- increases adhesion, contains quartz aggregate
- for walls and floors
- shows excellent adhesion to non-absorbent substrates and to substrates with a very smooth surface - for concrete substrate the adhesion is at least 1.0 MPa
- addition of selected quartz aggregate increases the adhesion of the applied layers
- intended for applications at elevated temperatures - recommended for use in the range from 5 C to 35 C, inside and outside the building in
- frost-resistant
- waterproof
- drying time 4 h
- application with a brush or roller
- inwards and outwards
Application
- recommended for the preparation of the substrate for bonding stone and ceramic cladding, for floor underlays of the Atlas SMS and Atlas SAM lines laid on critical substrates
- difficult substrates: hardened concrete floors, reinforced concrete structures, wet cast ceilings, cement floors and screeds with underfloor heating, anhydrite screeds with underfloor heating, terrazzo, existing ceramic and stone cladding, non-sanded OSB boards, structural wood-based panels, stable wooden floors, plasterboards, know-gypsum boards, stable plastic coverings, stable plastic coverings, steel substrates
- type of finishing layer - ceramic and stone cladding fixed with cement adhesives, gypsum cladding and stucco fixed with gypsum adhesives, cement floors and screeds, anhydrite screeds, cement, cement-lime, gypsum plasters, gypsum and cement plasters
- field of application: on horizontal surfaces, on vertical surfaces
Technical data
- a mass density of about 1.5 g / cm
- substrate and ambient temperature during work from +5 C to +35 C
- commencement of further works after priming after about 4 hours
- adhesion to terrazzo> 1.0 MPa
- adhesion to ceramic tiles> 1.0 MPa
- adhesion to concrete> 1.0 MPa
- adhesion to OSB boards> 0.8 MPa (breaking occurs in the OSB layer)
- average consumption of 0.3 kg of weight per 1 m
Technické údaje - vlastnosti
Přílohy