Ytong Forte are blocks of the PP2,5 / 0,4 variety, which are characterized by the same high thermal insulation as the PP2 / 0,4 variety produced so far. At the same time, the new product b has a higher compressive strength (2.5 N / mm2), which allows it to be used in masonry with greater compressive strength required.

Wall with a block in Ytong Forte, thickness 24 cm thick insulation 15 cm can be used even in passive buildings! In turn, Ytong Forte blocks thick. 36.5 cm, with a heat transfer coefficient of U = 0.29 W / (m2K), are an excellent proposition for single-layer walls separating heated and unheated rooms, e.g. a garage from the living area.

Advantages of walls made of pulley in Ytong Forte:

• high thermal insulation,
• lower transport cost due to low weight,
• no bridges in thermal thanks to the use of Ytong-Silka mortar and element in systemic ones,
• non-flammable and fire resistant material.

Due to the high dimensional accuracy of the wall with the element in Ytong Forte, it builds on Ytong-Silka thin mortar, which allows for a significant reduction in masonry time and reduction of thermal bridging. The availability of a wide range of complementary elements such as: warm Ytong YN and YF lintels, rim insulation - Multipor EDW tiles and Ytong ceiling panels is of great importance in obtaining good parameters in thermal partitions from a Ytong Forte block. Thanks to these elements, the walls of the block in Ytong Forte are warm and made of a homogeneous material - cellular concrete.