Weber.tec Superflex D2 is a flexible, fast-setting sealing micro-mortar. Two component product. Easy to work with. It binds without scratches or internal stress.

Technical data

• based on cement, selected aggregate, special polymer in
• grey colour
• powder + liquid
• pasty consistency
• the possibility of further processing after 90 min
• good adhesion to the ground
• the number of applied layers is a minimum of 2
• setting and hardening - hydraulic and as a result of chemical reaction
• UV and mr resistance with
• resistance to aging
• density of ready-mixed mortar ~ 1.05 kg / dm ³
• processing time ~ 45 min (at +23 C and 50% relative humidity)
• application (air and substrate) temperature from +3 C to +30 C
• full strength (e.g. tank filling in: after 3 days (at +23 C and 50% relative humidity)
• traffic load and the ability to cover tiles after 4 hours
• drying independent of atmospheric conditions (chemical bond)

Application

• execution of horizontal and vertical waterproofing embedded in the ground of parts of buildings and structures (e.g. foundation benches, foundation walls, foundation slabs)
• sealing plinth zones of buildings
• sealing with negative water pressure (removing the waterproofing from the ground) - cavity up to 3 m below the groundwater table
• secondary insulation of buildings and structures (walls, floors), also bath type
• sealing water tank, including drinking water up to 15 m water column, as well as swimming pool, tank in sewage treatment plant
• sealing composite (sub-tile) balcony and terrace in
• sealing wet and damp rooms (bathrooms, showers)
• pre-sealing and adhesive layer for sealing of polymer-bituminous mastics (KMB)
• temporary sealing during construction
• bonding layer on existing bituminous (asphalt) coatings

The application is possible with a masonry brush, brush, trowel, as well as a spraying aggregate.