Weber Deitermann - 2komponentní povrchový tmel Weber.tec 827 S (Superflex 40 S)
cena na vyžádání
propagační cena
jednotková síť
1851,71Kč pro balíček
minimální komerční
množství produktu
1.00 balíček
2822,73Kč
pro 1.00 balíček
1851,71Kč
pro 1.00 balíček
propagační cena
hrubá jednotka
2277,61Kč
pro balíček
minimální komerční
množství produktu
1.00 balíček
3471,96Kč
pro 1.00 balíček
celková cena
propagační sleva
2277,59Kč
pro 1.00 balíček
Popis produktu
weber.tec 827 S (Superflex 40 S) is a two-component sealing resin used for sealing horizontal, vertical and sloping surfaces. Special product properties:
- very good adhesion to the ground,
- crack bridging ability,
- waterproof,
- flexibility,
- resistance to heat and frost,
- resistance to aggressive media effects.
properties
Flexible, reactive epoxy resin for under-tile sealing coatings
- very good adhesion to the ground
- ability to bridge fig
- waterproof
- flexibility
- resistance to heat and frost
- resistance to aggressive media effects
Application
weber.tec 827 S (Superflex 40 S) creates a flexible and tight membrane, directly under the ceramic cladding. Its areas of application are:
- swimming pools,
- brine and thermal pools,
- wet rooms additionally loaded with aggressive media (kitchens in mass caterers, rooms in butchers, slaughterhouses, car workshops, etc.),
- laboratories.
The product can also be used as a tile adhesive (after adding 3 4% by weight thickener - quartz sand) and to protect and / or seal flashings on balconies and terraces. The strip sheets must be firmly connected to the ground with dowels. Weber.tec 827 S (Superflex 40 S) can be used on:
- concrete / reinforced concrete base,
- traditional (cement) plasters,
- cement screeds,
- existing, stable ceramic cladding (glazed and unglazed),
- ground asphalt (indoor).
Weber.tec 827 S (Superflex 40 S) resin should not be used on existing ceramic cladding in the outdoor area (e.g. balcony and terrace surfaces) that are above heated or inhabited rooms.
In the kitchens (except the kitchen stalk and an outlet gutter), in laboratories and wet rooms wear weber.tec 827 S (Superflex 40 S) is: | 1.5 kg / m2 (layer thickness 1.2 mm) |
In pools and kitchens (in between kitchen stem and drainpipe) weber.tec consumption 827 S. (Superflex 40 S) is: | 2.5 kg / sq m (layer thickness 2 mm) |
Technické údaje - vlastnosti
- barva:
- betonowoszary
- hustota [kg / dm3]:
- 1,25 kg / dm3
- konzistence:
- pastowata
- pěší zátěž po:
- 24 - 48 hod
- plně naložen:
- po 7 dniach
- počet potřebných vrstev:
- 2 - 3
- směšovací poměr:
- składnik A : składnik B w stosunku 100:45
- spotřeba [kg/m²]:
- 1,5 - 2,5 kg / m
- teplotní rozsah aplikace:
- 10 - 30 ° C
- tloušťka vrstvy:
- 1,2 - 2 mm
- základna:
- żywica epoksydowa
- zbytková sušina:
- 100 %
- způsob aplikace:
- smarowanie
- způsob aplikace:
- szpachlowanie
- Doba zpracování:
- 30 min.
- množství v balení:
- 2 kilogram
Přílohy