Chemical composition after drying - by weight:

• Al2O3 - min 10%
• SiO2 - max 85%

Destiny

Bonding element in ceramic used in the construction of the fireplace and stove in ceramic (calcium silicate insulation boards, vermiculite boards, insulation cords, ceramic tiles and tiles, etc.)
Bonding refractory ceramics to various ceramic and metal substrates
Bonding chamotte and other refractory bricks.

Method of use

After opening the container, mix the adhesive thoroughly with a spatula. Apply to cleaned surfaces with a putty knife or trowel. Drag the putty with teeth on the adhesive layer and press the glued element to the base in the case of gluing calcium silicate boards, impregnate the cut area with impregnation with HTG after gluing the element in wait for about 12 hours and then dry the joint at a minimum temperature of 110 C using a blower, electric heater or lighting a fireplace or stove. A small amount of water can be used to dilute the adhesive. When gluing calcium silicate boards, use HTG waterproofing instead of water

mischievousness

The adhesive is neither toxic nor harmful to health. However, it may irritate the skin. Avoid breathing vapors and protect your hands with gloves and in case of eye contact, rinse with plenty of water. The adhesive is non-flammable and its vapors in the air do not form explosive mixtures.