Injection hose for sealing construction joints in waterproof structures against the inflow of water, as well as saline water.

Features

• single injection possible with Sika polyurethane injection resins
• possibility of multiple injections using Sika acrylic resins or microcement paste
• very economical and safe solution
• easy to use and install
• Ideal solution additionally in combination with Sika Waterbar / Waterstop
• technology useful in many different structures and construction methods
• solution tested at water pressure up to 10 bar (100m)

Application

The product is used to seal working joints in waterproof structures against the inflow of water and saline water. The injection hose is concreted in during concreting. When re-sealing or resealing of a working joint, SikaFuko Eco 1 can be injected with customized Sika injection materials based on polyurethane resins. While maintaining the appropriate technological rigor, it is possible to repeatedly use acrylic-based injections or microcement slurry.

Technical data

• white inner hose made of PVC
• red outer layer made of foamed polyurethane
• Shore A (D) hardness: white inner hose D 50 +/- 3, red outer layer A 80 +/- 5 (not swollen) - according to DIN 53505
• elongation at break: white inner hose ≥ 100%, red outer layer> 50% - according to DIN 53504
• strength: white inner hose ≥ 10 N / mm ² (DIN 53504), red outer layer ≥ 10 N / mm ² (DIN 53504)
• product stored in unopened, original packaging, in dry conditions, at a temperature of +5 C to +35 C, preferably within 48 months from the production date
• set: 200 m SikaFuko Eco 1, 10 m green PVC hose (inlet), 10 m white PVC hose (outlet), accessories - 2 m connecting pipe, 4 m heat-shrinkable sleeve, x 50 plugs, 1 adhesive can, 1 roll of tape, x 800 clip in fastening