Combidic-2K Classic is a two-component thick-layer coating (PMBC) containing polystyrene. Occurs as a modified anine bituminous emulsion (component A) with a cement-based compound and mineral fillers (component B). It is seamless and seamless. Does not contain solvent in.

Technical data

• appearance of component A / B: brown liquid / gray powder
• A / B component smell: characteristic / odorless
• density at 20 C of component A: 0.7 g / cm ³
• density at 20 C of component B: 1.6 g / cm ³
• dynamic viscosity at 20 C of component A: 17,000 mPas
• pH value at 20 C of component A: 9.5
• miscible with water
• auto-ignition temperature: not a danger of self-ignition
• explosive properties: not explosive
• consumption of approx. 1.3 l / m ² / mm layer thickness for fixing insulation boards
• consumption 4 l / m ² = 3 mm dry film thickness with ground moisture, non-accumulating infiltration water, non-pressurized water (moderate load)
• consumption approx. 5 l / m ² = 4 mm dry film thickness with temporarily accumulating infiltration water, pressure water

Application

• as building insulation
• as an adhesive for protective, insulating and drainage panels
• for bridging fig
• for sealing (PN-EN 15814 / DIN18195-2)
• on typical building substrates
• for indoor and outdoor use