kategorie

Qmar - sanitární silikon

výrobce: Qmar

kategorie: QMAR - stavební chemie

Číslo produktu: 15532

Vícenásobek objednaného čísla: 12 Přidat do košíku

Přidat do schránky Zeptejte se na produkt Nahlásit chybu v popisu Nákup na splátky je k dispozici od 100 PLN hodnoty produktu nebo celé objednávky. Leasing je k dispozici od 369 PLN hodnoty produktu

cena na vyžádání

ceník cena
jednotková síť
87,39Kč
pro ks
propagační cena
jednotková síť
76,68Kč
pro ks
minimální komerční
množství produktu
1.00 ks
jednotka
obchod
1.00 ks
celková cena
čistý ceník
87,39Kč
pro 1.00 ks
celková cena
reklamní síť
76,68Kč
pro 1.00 ks
ceník cena
hrubá jednotka
107,49Kč
pro ks
propagační cena
hrubá jednotka
94,32Kč
pro ks
minimální komerční
množství produktu
1.00 ks
jednotka
obchod
1.00 ks
celková cena
ceník hrubý
107,49Kč
pro 1.00 ks
celková cena
propagační sleva
94,33Kč
pro 1.00 ks

Popis produktu

A special silicone sealant is intended for grouting ceramic cladding, especially in the corners of the walls, in the joints of the walls with the floor and in places of expansion joints. It is also used to fill gaps in sanitary facilities, e.g. around baths, shower tray, washbasins, as well as kitchen furniture, air duct and duct in sanitary and heating installations. Due to the components contained in the composition that prevent the mold from covering the hardened joint, the sealant is used especially in sanitary rooms, e.g. bathrooms, shower cabins, toilets, kitchens, laundries and other rooms with increased humidity. It has very good adhesion to commonly used non-absorbent materials in construction, such as ceramic tiles (tiles, terracotta, stoneware, clinker), glass and porcelain, faience and enamel elements. The product can also be used on surfaces covered with strongly adhering paint and on corrosion-protected metal surfaces, but this type of application (as well as on other unusual surfaces) should be preceded by making adhesion tests. Sanitary silicone should not be used to glue aquariums, mirrors and surfaces where the silicone should have direct contact with food or drinking water. Permanently high flexibility as well as resistance to weather conditions and UV radiation allow the product to be used both inside and outside the building.

properties

  • resistant to mold and fungi,
  • permanently elastic
  • workability up to 5 minutes,
  • temperature resistance from -40 C to +180 C.

Substrate preparation and usage

Surfaces should be clean, dry and free from dust, dirt and grease. Before use, cut the end of the tube and screw the applicator on, cutting it to the proper thickness of the weld. Squeeze the mass using a suitable gun. The applied sealant can be smoothed with a spatula or other tool wetted with a soap solution or other similar agent.

attention

To avoid mistakes, check the suitability of the product for its intended use. Uncured product may be irritating to respiratory system and skin. KEEP AWAY FROM CHILDREN. shelf life: 18 months.


Technické údaje - vlastnosti

Doba zpracování:
5 min.
konzistence:
pasta
rychlost vytvrzování:
ok. 2mm / 24h
skladovací teplota:
od +10 do +25 ° C
specifická gravitace:
0,98 g / cm
tepelná odolnost po vytvrzení:
od -40 do +180 ºC
vytvrzovací systém:
acetatowy
balení [ml]:
300 ml
barva:
bezbarwny

Přílohy