Qmar - nízkotlaká hadicová pěna
cena na vyžádání
propagační cena
jednotková síť
150,66Kč pro ks
minimální komerční
množství produktu
1.00 ks
propagační cena
hrubá jednotka
185,32Kč
pro ks
minimální komerční
množství produktu
1.00 ks
celková cena
propagační sleva
185,30Kč
pro 1.00 ks
Popis produktu
The foam is intended for assembly and sealing for specialized assembly groups.
Application
- especially recommended for all types of windows and doors
- thermal insulation of water, sewage and central heating networks
- bonding and insulating wall panels, corrugated sheets, roofing boards, etc.
- soundproofing and sealing of partition walls and car cabins
- joining prefabricated element in wooden frame construction
- thermal insulation roof in and flat roof in
- filling gaps in thermal insulation when insulating buildings
properties
- the foam has extremely good adhesion to smooth and porous surfaces occurring when installing doors and windows: PVC, masonry, concrete, brick, wood, metal and other
- low-pressure formula eliminates frame warping and ensures full gap filling
- has excellent thermal insulation and soundproofing parameters
- cures under the influence of moisture contained in the atmospheric air
- resistant to mold and mildew
Method of use
- Thoroughly clean and degrease the working substrate.
- Before use, make sure the can is positive (optimum +20 C).
- Shake the can well (for about 30 seconds) to thoroughly mix the ingredient in.
- Screw the applicator to the can, the working position for assembly is the can position "to the top".
- Apply foam from below to the gap.
- Fill the joints up to 50% deep, but not more than 5 cm per one layer, wider than 5 cm should be filled in layers,
- Moisten each layer after application with water, e.g. with a sprayer.
- Excess foam after curing should be removed mechanically (e.g. with a knife).
- After full hardening, the foam should be protected against UV rays using plaster, paints, for example.
Technické údaje - vlastnosti
- barva:
- kremowy
- nastavení času:
- 2 - 24 hod
- skladovací teplota:
- od +15 do +25 ° C
- tepelná odolnost po vytvrzení:
- od –60 do +100 ºC
- účinnost (volné pěnění):
- do 45 L
- Zdánlivá hustota:
- 19 ± 10% kg / m
- balení [ml]:
- 750 ml
Přílohy