One-component polyurethane foam, pistol designed for specialized assembly groups for assembly, sealing and soundproofing.

Application

• assembly, sealing and joining of window and door frames
• thermal insulation of water, sewage and central heating networks
• gluing and insulating corrugated metal wall panels, roof tiles, etc.
• thermal insulation roof in and flat roof in
• filling gaps in thermal insulation when insulating buildings in skeletal structures
• embedding stairs, window sills and other finishing elements

properties

• above-average real performance - from one can you can get up to 65 liters per product
• excellent thermal insulation and soundproofing parameters
• regular structure, flexibility, waterproofness, thermal resistance and exceptional dimensional stability
• curing under the influence of atmospheric moisture
• high mechanical strength and excellent adhesion to typical ones
• material in construction materials such as: brick, concrete, plaster, wood, metals, polystyrene, hard PVC and rigid PUR foams
• provides stability and flexibility of the mounted element in
• resistance to mold and fungus in

Method of use

• Thoroughly clean and degrease the working substrate.
• Before use, make sure the can is positive (optimum +20 C).
• Shake the can well (for about 30 seconds) to thoroughly mix the ingredient in.
• Screw the gun to the can, the working position for assembly is the can position "to the top".
• Apply foam from below to the gap.
• Fill the joints up to 60% deep, but not more than 5 cm per layer. Wider than 5 cm should be filled in layers.
• Moisten each layer after application with water, e.g. with a sprayer.
• After curing, remove excess foam by mechanical means, e.g. with a knife.
• After full hardening, the foam should be protected against UV rays using plaster, paints, for example.