Kreisel - Opravná malta 456
cena na vyžádání
propagační cena
jednotková síť
697,74Kč pro balíček
minimální komerční
množství produktu
1.00 balíček
835,65Kč
pro 1.00 balíček
697,74Kč
pro 1.00 balíček
propagační cena
hrubá jednotka
858,23Kč
pro balíček
minimální komerční
množství produktu
1.00 balíček
1027,85Kč
pro 1.00 balíček
celková cena
propagační sleva
858,23Kč
pro 1.00 balíček
Popis produktu
Mortar 456 is intended for making a basic, profiling repair layer in the concrete repair system at KREISEL. Mortar 456 can be the final finishing layer at elements that do not require perfect surface smoothness or it can be a primer for mortar 460. It is characterized by low shrinkage, high adhesion and rapid increase in mechanical strength. For use in the 5-50mm layer. The system allows the repair of an element in concrete and reinforced concrete damaged under the influence of a factor in mechanical, physical and chemical (causing destruction of concrete and corrosion of steel). It is suitable for repairing such elements as: balconies, terraces, brackets, columns, lintels, etc. It can also be used for local repair and removal of defects in the concrete surface (e.g. defects, cancer, caverns). This mortar is water and frost resistant.
Technical data
- shrinkage after 28 days of hardening: 0.12%,
- carbonation: meets
- thermal compatibility: ≥ 0.8 MPa,
- capillary absorption: ≤ 0.5 kgm-2h-0.5,
- soluble chromium (VI) content in the finished product mass: ≤ 0.0002%,
- classification according to PN-EN 1504-3: 2006: R2,
- Storage: up to 12 months from the date of production, in dry places and in undamaged factory packaging
Technické údaje - vlastnosti
- doba opotřebení:
- 60 min.
- kg na paletě:
- 1200 kilogram
- mít na sobě:
- 1,9kg zaprawy na 1 m2 na 1 mm grubości warstwy
- množství v balení:
- 25 kilogram
- obsah chloridů:
- ≤ 0,05 %
- pevnost v ohybu [MPa]:
- ≥ 5 MPa
- pevnost v tlaku [MPa]:
- ≥ 25,0 MPa
- přilnavost k betonovému podkladu:
- ≥ 0,8
- složení:
- cement portlandzki, wypełniacze mineralne, polimery, dodatki modyfikujące
- spotřeba vody:
- ok. 4,0 litra wody na 25kg zaprawy
- teplota zpracování a aplikace:
- +5 do +25 ° C
- tloušťka vrstvy:
- 5 - 50 mm
- zrnění:
- do 4 mm
Přílohy