Elastic gel glue based on cement and reinforcing fibers with the addition of bentonite, used for gluing ceramic tiles and porcelain stoneware indoors.

Features

• Gray
• fine-grained
• thixotropic
• elasticized
• good flow under the plate

Application

• gluing ceramic tiles (terracotta, glaze), stoneware
• substrates with low deformation properties, such as plasterboards
• for cementitious and anhydrite screeds, also with underfloor heating
• fine grain <0.3 mm, fibers, bentonite and special polymers improving working properties compared to conventional C1T and C1TE adhesives
• it is possible to add water depending on the preferences of the contractor and the place of use (floor or wall)
• removes unevenness of the substrate up to 15 mm

Technical data

• shelf life after mixing with water 2 h (at a temperature of +20 C)
• time for laying tiles after applying the adhesive to the substrate: about 30 minutes (at a temperature of +20 C)
• correction time approx. 15 min (at an ambient temperature of 20 C)
• possibility of walking on the made cladding after about 24 hours
• grouting possible after 48 hours
• layer thickness from 2 to 15 mm
• average consumption per 1m ^{2 is} about 4.5 kg
• capacity for an average consumption of about 5.5 m ² per package
• mixing ratio with water about 6.5 liters of water per 25 kg of dry mix
• adhesion ≥ 0.5 N / mm ²
• soluble chromium VI content ≤ 0.0002%
• package 25 kg