White gel glue with nanoparticles for gluing wall and floor tiles inside and outside the building, including swimming pools and balconies. Product based on cement and special silicas.

Features

• white
• fine-grained
• flexible
• thixotropic
• frost-resistant
• good flow under the plate

Application

• sticking all kinds in tiles and stone slabs of marble, sandstone, granite, travertine, slate, andesite, basalt and others
• sticking terracotta, ceramic, porcelain and clinker tiles, including large-format ones
• gluing tiles on difficult surfaces, on balconies and terraces, in wet rooms (laundries, bathrooms, kitchens)
• for cement and anhydrite screeds, also with underfloor heating.
• fine grain <0.3 mm and special polymers with nanoparticles contribute to increasing the comfort of work compared to traditional products
• possible adjustment of the water depending on the preferences of the contractor and the place of use (floor or wall)

Technical data

• grain size 0.3 mm
• C2TE classification (according to EN 12004 + A1)
• shelf life after mixing with water: about 3 hours (at a temperature of +20 C)
• time for laying tiles after applying the adhesive to the substrate up to 30 minutes
• correction time up to 20 minutes
• possibility of walking on the finished cladding after about 12 hours
• possibility of pointing after about 36 hours
• layer thickness from 2 to 15 mm
• average consumption per 1m ^{2 is} about 4.5 kg
• capacity for an average consumption of about 5.5 m ² per package
• mixing ratio with water about 8.0 liter in water for 25 kg of dry mix
• adhesion ≥ 1.0 N / mm
• package 25 kg