Drizoro - epoxidová sláma Maxepox TAR F povlak
cena na vyžádání
propagační cena
jednotková síť
346,90Kč pro kilogram
minimální komerční
množství produktu
25.00 kilogram
10057,46Kč
pro 25.00 kilogram
8672,56Kč
pro 25.00 kilogram
propagační cena
hrubá jednotka
426,69Kč
pro kilogram
minimální komerční
množství produktu
25.00 kilogram
12370,68Kč
pro 25.00 kilogram
celková cena
propagační sleva
10667,23Kč
pro 25.00 kilogram
Popis produktu
Highly chemical resistant, two-component waterproof coating based on epoxy resin and specially selected tar oils, with the addition of mineral fillers.
Features
- increased flexibility
- ability to bridge shrinkage cracks and hairline cracks
- very good adhesion to concrete and metal
- very good chemical resistance to salts, oils, gasoline, sulphates, detergents and other chemical compounds
- product free to solvent v
- good mechanical properties, resistance to thermal movements of the substrate and the effects of dynamic loads
- product with increased resistance to UV radiation
- non-flammable
Application
- waterproofing and protection of concrete and steel surfaces against permanent or temporary aggressive effects of: washings and industrial water, groundwater, municipal and industrial wastewater
- execution of chemical-resistant waterproofing from the ground side: foundation in, pipeline in, sewage system, facility in a sewage treatment plant, etc.
- making protective coatings resistant to permanent or temporary impact of sewage and gas in the chemical volatilization of sewage as a result of the process - sewage treatment plant tanks in
- waterproofing from the ground side in underground construction (tunnels, hydrotechnical structures of the marine and inland environment)
- waterproofing of structures or their parts, subjected to dynamic loads, e.g. bridge slabs, tanks, etc.
- a protective coating on concrete and metal surfaces, protecting against aggressive effects of: fuels, gasoline, grease, oil, oil, sulphate, etc.
Technical data
- appearance A + B black liquid
- density 1.15 0.05 kg / l
- solids content 100%
- suitability for use (at 20 C) 30–60 min
- adhesion to concrete 3.5 MPa (according to ASTM D4541)
- adhesion to steel 2.4 MPa (according to ASTM D4541)
- elongation at break 100% (according to ASTM D412)
- tensile strength 3.6 MPa (according to ASTM D412)
- maturation time 7 days
- flash point - non-flammable product
- consumption / thickness - consumption per layer / total 0.4-0.5 / 0.8–1 kg / m 2
- layer thickness / total 0.35-0.45 / 0.7-0.9 mm
- package 25 kg
Technické údaje - vlastnosti
Přílohy