Stuccoco Grobzug FG 88 is a fast-setting coarse-grained mortar that can be used to make cores (undercoat) of profiles for pilaster strips, cornice, rustic, etc. The mortar can be used for work on a table or wall. In addition to supplementing the wall with this material, it is suitable for rounding and rounding, for plastic shaping the blow in stone and for rustication of facades. The mortar is suitable for indoor and outdoor applications. Stuccoco Grobzug FG 88 is not suitable for stucco work on insulation systems, on which extruded polystyrene fittings, etc. should be used. Stuccoco Grobzug FG 88 guarantees, apart from good shape stability and low tendency to shrinkage, easy pulling and fast setting of material. Thanks to the fast setting of the material and the use of mineral aggregates, this mortar is suitable for pre-drawing even thicker sections of profiles. Hydrophobic additives allow the use of mortar in outdoor applications and wet areas. Stuccoco Grobzug FG 88 does not contain any corrosive (chloride) components.

Technical data

• compressive strength (28 days): 3.5 - 7.5N / mm,
• usage time: approx. 20 min. at 20 C / humidity above 65%
• setting time: approx. 2 hours at 20 C / humidity above 65%
• wy b has the required documents authorizing its use.

attention

• irritating
• Irritating to respiratory system and skin.
• Risk of serious damage to eyes.
• Keep away from children.
• Do not breathe dust.
• Avoid contact with skin and eyes.
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
• Wear suitable gloves and eye / face protection.
• If swallowed, seek medical advice immediately and show this container or label.